What’s the best CAD monitor?

I’m in the market for a new monitor (display) for my CAD PC.   Does anyone have a recommendation for a good balance between cost vs. performance.   The larger, the better 🙂

Edit: Thanks for the comments. I should clarify further…   I’m not after a 4K monitor due to the reported issues with AutoCAD and 4K displays. I’m really tempted by the Dell Ultrasharp series http://www.dell.com/ed/business/p/ultrasharp-monitors

Are you looking for a 4K, wide screen? What kind of budget do you have Cadcamadam?

on February 14, 2017.

Actually for now 4K monitors have been reported to have issues with AutoCAD 2017 & AutoCAD 2017 Lt, but I am sure it will be solved in the next hotfix

on February 15, 2017.

@cadman I’m not after a 4k monitor. But yes, I guess it should be widescreen. Budget is up to $1,000 (USD) @JavaParaTrooper – yes, that’s what I heard also. I’m steering well clear of 4K for now. So far – the DELL Ultrasharp monitor seems to be a really good option. http://www.dell.com/ed/business/p/ultrasharp-monitors I had Dell before and it was very good tbh.

on February 15, 2017.
Add Comment
2 Answer(s)

When selecting hardware for your CAD system, most would look at having lots of RAM, High End multiple GPU’s and nice fast SSD’s.  While having a high-end system is one of the most important aspects of an excellent user experience with Autodesk Software, more often than none CAD monitors tend to be overlooked at in this area.

 

If you think about it for a minute – the monitor is the piece of hardware that actually enables you to directly interact with your workstation.  Although there are many monitors on the market one can possibly use, it normally boils down to what size your looking for, whether multiple monitors is an option, the resolution of each monitor and what you can get in the budget you have set for yourself. Please see below for three monitors that you could look at from budget affordable range to High End Expensive Range:

 

  • Budget Monitor: ASUS VS228H-P 

This is a fantastic budget monitor that is perfect for CAD and gets the job done. It is a LED based monitor with 1080p and HDMI input and has large screen real estate at 21.5 inches. It is slim and can be wall mounted if needed. Follow the link below:

 

http://www.ebuyer.com/609556-asus-vs228ne-21-5-led-full-hd-monitor-vs228ne?mkwid=sWA3N2WiH_dc&pcrid=51630194939&pkw=&pmt=&gclid=CjwKEAjw3KDIBRCz0KvZlJ7k4TgSJABDqOK7L8yBhl17XpgyN2phDJOu9d4UW4_AvuKZGQzJ952plxoCMB_w_wcB

 

 

  • Mid-Range Monitor: ASUS MX279H 

This is an awesome monitor with high end features but doesn’t break your bank balance. It is a 27 inch display with IPS technology. As an added benefit, this CAD monitor comes equipped with two 3-watt speakers for sound and dual HDMI ports. I personally use multiple monitors of this range on a daily basis for all my work, including CAD. It has an excellent IPS display, In simple terms, IPS offers users wider viewing angles (in this case, 178 degrees) and better colours by allowing more light to pass through the monitor Follow the link below:

 

http://www.ebuyer.com/452442-asus-mx279h-27-ips-led-lcd-hdmi-monitor-mx279h

 

  • High-end Monitor: Samsung or Phillips Ultra HD 

This is one few top-end monitors with a 4K resolution display. The monitor has over 1 billion colors for the best picture quality. If you want the best hardware possible for Autodesk Software, then this monitor you got to have in your armoury. Follow the link below:

 

http://www.ebuyer.com/707245-samsung-u32e850r-32-freesync-uhd-monitor-lu32e85krs-en

 

 

BOTTOMLINE:

 

If you are still confused and unsure of where to start, take a trip down to your local electronics or computer shop and test-drive a few monitors, to get a feel for the different available sizes, and pick a setup that will work for you.  Ensure you keep in mind that it’s important to consider just how important this piece of hardware is to your experience when using your 3D CAD applications. Therefore, make sure to choose the best CAD monitor that fits your budget and needs. Good luck!

Answered on May 2, 2017.
Add Comment

CAD Monitors

It’s important to invest in a monitor that meets your needs. However, when you’re on a budget, you should also avoid overspending on extra features that you don’t need for CAD work. In our list below, we’ve featured a selection of monitors which offer a good compromise between great technical performance and reasonable prices.

1. BenQ PD3200Q

2. Philips BDM3490UC

3. Samsung U28E590D

4. BenQ BL2711U

5. Dell U3417W

Answered on December 7, 2017.

You’ve copied and pasted that from the Scan2CAD post :p  The 5 Best CAD Monitors Under $1000: Compared

on October 2, 2019.
Add Comment

Your Answer

By posting your answer, you agree to the privacy policy and terms of service.